// Pharma & Biotech
Connected instruments for your R&D labs
For drug discovery, biotech research, assay development and process development: we connect your benchtop instruments and send each measurement to your ELN or LIMS. Every value arrives with the instrument serial and a Gateway timestamp, ready for automation and FAIR data.
OPC UA / LADS · SiLA 2 · AnIML / ASM · FAIR data · Gateway timestamps
// At a glance
lab instruments in our
Connector Library
to build a new connector for
a well-documented device
to a working platform with
Integration & Rollout
of captured measurements carry
a Gateway timestamp
// The challenge
Results still reach your ELN by hand.
Drug discovery, biotech research, assay development and process development labs rely on benchtop instruments: balances, pH meters and NIR spectrometers. Often, scientists write each value on paper and type it into the ELN or LIMS later. Every manual step adds room for errors and takes time from your next experiment.
In one pharma lab, balance dates could be changed at the instrument. Today the Gateway timestamps every reading, independent of the instrument clock.
We connect your instruments straight to your ELN.
// R&D labs
From drug discovery to scale-up
Drug discovery
Balance and pH readings go straight to your ELN, each with the instrument serial and a Gateway timestamp.
Biotech research
Your data arrives in open formats, with AnIML or ASM where you need them, so your team can find and reuse it in the next project.
Assay development
Gateway Touch checks each value against your protocol’s expected range at the bench and records every intermediate value.
Process development
Your robots and scripts read each connected instrument over OPC UA / LADS or SiLA 2, and drive it where the instrument allows.
// Use case · Data capture
Every reading in your ELN, with its context
The Gateway reads each value straight from your instrument and stamps it with its own clock. Your ELN or LIMS receives the reading with the instrument serial and the timestamp, ready for your analysis.
- Direct capture from instrument to ELN or LIMS, in place of manual transcription
- Gateway timestamps, independent of the instrument clock
- Audit-trail exports you can sign, so every recipient can verify them
- Provenance: which instrument, when and, with a sign-in or LIMS trigger, who started it
Everyone on your project works from the same record.
→ Complete records, built from the instrument data itself.
// Use case · Automation
Connect your NIR spectrometer to your robot
Take a lab that develops methods for analysing tablets and wants to automate them with a robot. The robot handles the samples, but the NIR spectrometer runs through its own vendor software. So a technician still starts every measurement by hand.
- The robot speaks OPC UA. Through SynConnect, the spectrometer speaks OPC UA / LADS, the companion specification for laboratory devices. Both share one protocol family, so the robot talks to the spectrometer through the Gateway, over one standard interface.
- The robot reads the instrument state, starts and stops measurements, positions the autosampler and runs calibration cycles, where the instrument supports remote control
- Tablets are picked, placed on the tray and measured, and the results go to your ELN or LIMS, with the robot running each measurement end to end
LADS makes each connected instrument that supports remote control a node in your automated workflow. Your robot integrates once against LADS, for instruments from different vendors.
→ Automation that includes the instrument itself.
// FAIR data
Instrument data your team can find and reuse
// Use case · Process development
Catch weighing errors at the bench
Repeatable experiments are essential in process development. A protocol calls for 200 grams, and 210 grams end up on the balance. If the error shows up later in the ELN, you repeat the run.
- Live checks of every measurement against the protocol’s expected range
- Out-of-range values flagged at the bench, on the Gateway Touch screen or in your ELN or LIMS workflow
- Errors caught at the bench, before they enter your ELN or LIMS
- The full execution history: protocol and actual values, every intermediate value and the final result
We capture both, side by side, so your team can repeat the run.
→ Every run recorded in full, ready to repeat.
// Use case · Deployment
One architecture, from one bench to many sites
Pharma and biotech groups often run small research labs and large sites side by side. With SynConnect, both use the same gateways, the same connectors and the same way of working.
Start on a single bench
- Place the Gateway on the bench
- Add your benchtop devices in the management UI
- Ready to run on day one
Roll out to many sites
- Gateways pre-configured by us before they ship, if you want
- Gateways shipped to each of your sites
- Configuration managed on your own network, through the management API
- Your own CA-issued certificates in production
→ The same product and the same operations playbook for every site, whatever its size.
// Record by record
What each record carries
Instrument and operator
Every measurement carries the instrument serial and the Gateway timestamp. When the operator signs in at the bench or the LIMS triggers the run, it also carries the operator identity and method version.
Structured, exportable records
The Gateway keeps structured records in its audit trail. Export them as JSON or CSV, or as Syslog on request, for your review.
Timestamps at capture
The Gateway timestamps every measurement the moment it is captured, so each record shows when the reading was taken.
Signed exports, set retention
Signed audit-trail exports let every recipient verify that the file is authentic and unchanged. You set the retention time on the Gateway.
// Open standards
Traceable, reusable data on open standards
Traceable records
The Gateway timestamps every measurement, logs every action with its identity and lets you sign audit-trail exports.
OPC UA / LADS
The OPC UA companion specification for laboratory devices. Every connector speaks it, so your robots and orchestrators read each instrument the same way.
FAIR data
Findable, accessible, interoperable and reusable data, in open formats. Where you need AnIML or ASM, provenance travels in the format itself.
// Recommended setup
Your setup: gateways, data flows, services
At the bench
Gateway Touch: bench gateway with a touch display, where you build and adjust workflows. For lab operators.
Gateway 2: our headless benchtop gateway, the standard choice in the SynConnect line.
Data flow to your ELN and LIMS
Data Suite: data flows built on Apache NiFi. It routes and transforms your gateway data for your ELN and LIMS, and writes it into your cloud or onto your own servers. It includes AnIML converters, and we confirm the formats for your instruments.
Services for your project
Integration & Rollout: we integrate your instruments with your ELN or LIMS and deliver the full service
Custom Connector Development: a connector for your specialised instrument, in two days for a well-documented device
// Case studies
Ask us about projects like yours.
We offer three case studies on instrument integration and information modelling. Pick the one that fits your project and we’ll send it to you.
// FAQ
Questions from pharma and biotech R&D labs
Which instruments can you connect?
Our Connector Library covers 80+ lab instruments, for example balances and pH meters. Send us your instrument list, and we confirm the status of each model. For a new model, we build the connector: two days for a well-documented device, tested on a simulator first.
Will this work with our ELN or LIMS?
Each ELN or LIMS integration is a project we scope with you. We’ve worked with several commercial LIMS and ELN systems and can scope an integration for yours. The route, for example REST API or file exchange, is chosen in scoping. See LIMS integrations.
Can we get our data as AnIML or ASM?
Yes. We deliver your data as AnIML or ASM where you need it, so your team can find and reuse it. Data Suite includes AnIML converters, and we confirm the formats for your instruments.
What happens when a reading is out of range?
Gateway Touch flags out-of-range values at the bench, before the step is committed to your ELN or LIMS. The operator can act on them right away. The reading and the flag are both logged with their context.
How does the audit trail work?
Every measurement carries a Gateway timestamp that the operator can’t change, independent of the instrument’s clock. The audit trail records each action with the identity behind it. Audit-trail exports can be signed, so the recipient can verify the file.
Can the Gateway run in an isolated network?
Yes. The Gateway works entirely inside your network, and you can run it as an offline or fully isolated solution. You manage configuration on your own network, through the management API. We agree the update route for your isolated network with you.
How long does a multi-site rollout take?
We can pre-configure your gateways before they ship, and you manage them on your own network. Integration & Rollout is around 90 days to a working platform. Your timeline depends on scope, and we set it with you in the first call.
Do you have case studies?
Yes. Three case studies are available on request:
- Instrument integration in automated pill and tablet control
- Integration of a laboratory device for formulation development
- Spectrometry and information modelling with semantic context
Ask us for the one that fits your lab.
Planning a GMP-regulated deployment?
Ask us. We scope it with you.
Let's plan your first connected bench.
Book a 30-minute call. Show us your methods, your instruments and your ELN or LIMS. We’ll come back with a clear rollout plan, a scoped proposal and a quote if you want one.
// Going deeper
Related pages
Service
Training & Onboarding
We enable your team to use OPC UA / LADS, SiLA 2, AnIML and ASM in your own lab.
Why Synefex
EU Cyber Resilience Act
Our CRA readiness for the hardware in your lab, with our SBOM under NDA.